Advancing VOC Emission Control in solvent based Lamination industries

Best Practices and Environmental Considerations

The solvent based Lamination is a process used in the flexible packaging sector to create multi-layered, high-performance packaging materials: it involves bonding multiple layers of flexible films or foils together using a solvent-based adhesive. This process offers several advantages due to its strong bonding, versatility, and barrier properties.

Volatile Organic Compounds (VOCs) are emitted from a variety of industrial sources, including solvent based Lamination industries. VOCs are a major source of air pollution, contributing to air pollution, smog, and ground-level ozone formation. VOC emissions also show harmful effects on human health, causing respiratory problems and other health effects.

DEC, Dynamic Environmental Corporation, DEC IMPIANTI, DEC HOLDING, DEC SERVICE, DEC ENGINEERING, DEC AUTOMATION, DEC LAB, DEC ANALYTICS, solvent based Lamination, Solvent Recovery Units, SRU, solvent recovery, VOC emission control, pollution, emission reduction, prevention, activated carbon adsorption, XTO, thermal oxidation, RTO, regenerative thermal oxidizer, CTO, catalytic oxidation, solvent compatibility, efficiency, return of investment, ROI, cost, budget, EU, Solvent Emission Directive, SED, BAT, BREF, US, Clean Air Act, CAA, environmental impact, compliance, greenwashing, abatement, energy efficiency, reduction, minimization, mitigation, prevention, treatment, testing, filtration, CAPEX, OPEX, renovation, smoke, recommendations, guidelines, cost estimation, CAPEX, OPEX, abatement options, emission reduction potential, emission control characteristics, challenging

VOC emission control is mandatory in several countries, with specific limits at the stack of every industry. In this document we will cover the specific needs and solutions for the solvent based Lamination sector.

The Industrial Emissions Directive (IED) is a European Union directive that sets limits on VOC emissions from industrial processes. The IED includes a Best Available Techniques (BAT) Reference Document (BREF) for the solvent based Lamination sector, which outlines the best practices for controlling VOCs.

The US Clean Air Act (CAA) is a federal law that regulates air pollution in the United States. The CAA includes a number of provisions that address VOC emissions.

There are a number of VOC emission control technologies that can be used in solvent based Lamination manufacturing, to comply with environmental regulations.

The most performing technologies include:

SRU™ • solvent recovery units

SRU, Solvent Recovery Unit (also known as SRP, Solvent Recovery Plant) is a gas phase VOC adsorption system, based on activated carbon, complete of onsite desorption technology, typically employed as VOC Emission Control, allowing to respect VOC emission limits with a typical efficiency up to 99%, while recovering the solvents for direct reuse, at a fraction of their purchase cost, generating a very interesting ROI (a sustainable technology and a true path to decarbonization). They can cover from small to large SLA (solvent laden air) volumes and deal with a wide variety of VOCs, including water-miscible, non-water-miscible solvents.

XTO™ • thermal oxidizers

RTO, Regenerative Thermal Oxidation works by burning VOCs at high temperatures in a closed combustion chamber: through the oxidation reaction VOCs are converted to GHG (green house gasses, CO2, NOX, CO, and H2O). The heat generated during the combustion process is then captured and used to preheat incoming air (SLA, solvent-laden air), which in turn reduces fuel consumption and enhances energy efficiency compared to traditional thermal oxidation methods. The multi-tower design of RTO allows for continuous operation. Please note that catalytic oxidation is generally not applicable in solvent based Lamination, being the catalyst may be poisoned by some chemicals in the VOC emissions, which can make it quickly ineffective. Please note that catalytic oxidation is generally not applicable in solvent based Lamination, being the catalyst could be poisoned by some compounds in the chemicals (e g. inks, varnishes, lacquers, adhesives, etc), which can make it quickly ineffective. Any thermal oxidation processes will dramatically contribute to increasing your GHG (green house gasses) emissions and your fuel consumptions.

conclusions

Selecting a VOC emission control technology that is appropriate for your specific needs and that will help you to comply with VOC emission regulations while minimizing the overall environmental impact (as VOCs and GHGs), avoiding any form of greenwashing. You have to consider different factors, including the type of VOCs being emitted (type of solvents used), the size of the facility (quantity of solvents used per year), the area available for the installation and the budget (CAPEX) constraints for the selected VOC abatement system.

However, even if all of the VOC Emission Control Technologies listed above are effective in complying with VOC regulations, only SRU, solvent recovery unit technology is aligning with both environmental compliance requirements and environmental responsibility. SRU, solvent recovery units offer a sustainable and efficient solution for DECarbonization and circular economy implementation. By capturing and reusing solvents that would otherwise be wasted, these VOC emission control systems not only reduce the environmental impact of the solvent based Lamination industries but also contribute to cost savings (ROI) and regulatory compliance. Compared to thermal oxidation systems, solvent recovery units demonstrate superior energy efficiency, reduced GHG emissions, versatility, and a commitment to long-term sustainability (reduced resource consumption). Embracing such innovative technologies is crucial for industries to meet their environmental goals, drive sustainability (economic growth and environmental stewardship), and pave the way for a greener future.

your challenges, our solutions!

FORMIGONI, a family business - andrea formigoni, filippo formigoni, luciano formigoni, silvana giorgetti, angelo giorgetti, amalia sassi, angelica formigoni, tommaso formigoni